Table of Contents
Advertisement
1.12 Draft
It is necessary to set the draft to use the DBS
display mode, which shows depth below
surface.
1. Select DBS with the MODE control.
"
Confirm and set ships draft to use DBS
mode. appears.
"
2. Press the DRAFT key to display the draft
setting window.
3. Press the [+] key to increase the setting
depth and [-] key to decrease it. The
setting depth is -10 to 30 m in steps of
0.1 m.
The above window disappears in 10 seconds.
The draft setting is displayed at the upper
right corner and the range scale is shifted
according to the draft setting.
Advertisement
Table of Contents
