Isp Connection Problems - Gemtek WX-2211A User Manual

I can't connect to other computers on my LAN.
Cause:
The IP Addresses of the computers are not set correctly.
Network cables are not connected properly.
Windows network settings are not set correctly.
Resolution:
Make sure that each computer has a unique IP Address. If using DHCP
through the WIRELESS SOHO Router, make sure that each computer is set
to "Obtain an IP Address automatically" and restart the computer. Use the
WINIPCFG and PING utilities described in the appendix to make sure that you
can connect to each computer.
Make sure that the Link LED is on. If it is not, try a different network cable.
Check each computer for correct network settings.

ISP Connection Problems

I can access the Wireless SOHO Router, but I can't
connect to my ISP.
Cause:
Your DSL or Cable modem is not functioning correctly.
The cable is connected from the WAN port of the Wireless SOHO Router to
your DSL or Cable modem.
The wrong connection type is used in Setup.
The username and password is not input correctly.
Resolution:
Make sure that your DSL or Cable modem is running correctly and connected
to the WAN port of the Broadband Router.
Make sure that the right connection type is used in the web configuration.
Make sure that the username and password used in the connection type is
correct.
Some ISP's do not care if you share your broadband connection among
multiple users. Other ISP's will explicitly restrict this type of activity in your
service contract. It is important that you verify that you are in accordance with
31