Hardware Installation - Gemtek WX-2211A User Manual

Hardware Installation

Front Panel
The front panel provides LED's for device status. Refer to the
following table for the meaning of each feature.
Power Power status of the WIRELESS SOHO Router. A
steady LED indicates the power is on. No LED lights
indicate lack of power.
Status Router status indicates. When router boot or Flash
memory writing, then Status LED should be blinking.
WAN Wide Area Network status. When connected to the
Cable/DSL modem, the WAN LED should be steady
on.
Async Indicates console port Carrier Detect status. When
modem connection is established then LED should be
steady on.
WLS Indicates wireless initial ready status. When wireless
AP initial ready, WLS should be steady on.
LAN Link/ACT = Displays Link Activity.
1,2,3,4 When each of LAN port connects to PC or Port#1
connects to HUB, Link/ACT should be steady on, when
data transfer then Link/ACT should be blinking.
Rear Panel
The rear panel features a LAN port, WAN port, Serial port and
Factory Reset button. Refer to the following table for the meaning of
each feature.
Power Used to connect to the power outlet. Only use the
power adapter provided with the WIRELESS SOHO
Router. Use of an unauthorized power adapter may
cause damage to your device and violate your
4