Troubleshooting - Summit CR2B23T3B User Manual

Problem Description
Burner not glowing red after
selecting cooking zone
(approximately 3 seconds)
Burner glowing red intermittently * The cooktop temperature is controlled by switching the
Heating plate broken
Heating time longer than
expected
This symbol on the product or in the instructions means that your electrical and electronic
equipment should be disposed of at the end of its useful life separately from your household
waste. For more information please contact your local authorities or the retailer where you
purchased the product.

TROUBLESHOOTING

* Plug not inserted into an active socket
* Break in inner circuit
heat on and off. This means that it is not always
possible to see the burner glowing red. If you select a
low heat setting, the heat will switch off more often than
at higher heat settings. The heat also switches on and
off at the highest setting.
* Stop using the cooktop if there is a crack, chip or
missing piece.
* Concavity of pot base is too great.
* Size of pot base is too big.
15
Reason