Advertisement
Installation and mounting
Check everything in the box matches the order form and packing slip.
Contact your dealer if any item is missing.
The box contains the following items:
•
One junction box IFBMNTBOX
•
One Quick Start Guide 8200-1454-01 A0
•
One waterproof rubber sealing gasket
•
Six security torx screws
•
Six plastic anchors and screws (TP4)
Required tools
The following tools assist with installation:
•
A drill
•
A hammer
•
A Phillips head screw driver
•
Wire cutters
Installation and mounting procedure
To install and mount the camera, complete the following steps:
1
Drill 6 holes on the wall or surface, based on the mounting template.
2
Hammer the 6 screw anchors into the drilled holes.
3
Fix the junction box onto the wall or surface by fastening the 6 TP4 Tapping screws with the 6
screw anchors
4. Pass the cable thread of the camera through the adapter plate, and then secure the camera with the
adapter plate by fastening the 4 T20 screws.
Figure 2. Fixing the Junction Box
3
Advertisement
