Using Your New TV
Getting Started
Step 1
Connect the antenna
If you wish to connect a VCR, see the Connecting a VCR diagram below.
Antenna cable (not supplied)
or
F connector
(not supplied)
Antenna cable (not supplied)
Connecting a VCR
To watch the video input, press VIDEO (see page 11).
Antenna cable (not supplied)
To antenna
output
VIDEO IN
VIDEO OUT
To video and
audio outputs
4
Using Your New TV
CAUTION
• Do not plug in the power cord until you have completed making all other
connections; otherwise a minimum leakage current might flow through
the antenna and other terminals to ground.
• To avoid battery leakage and damage to the remote, remove the batteries
from the remote if you are not going to use it for several days. If any
liquid that leaks from the batteries touches you, immediately wash it
away with water.
Antenna
adapter
(supplied)
Antenna
adapter
(supplied)
VCR
AUDIO
VIDEO
S video cable
R
L
(not supplied)
To S video
output
Audio/Video cable
(not supplied)
Rear of TV
To ˘ (antenna)
Rear of TV
COMPONENT VIDEO(DVD) IN
R
L
Y
VIDEO
IN
1
2
S VIDEO
To
S VIDEO input
VIDEO (yellow)
AUDIO-L (MONO) (white)
AUDIO-R (red)
: Signal flow
C
C
B
R
MONITOR
OUT
3
VIDEO
AUDIO
To VIDEO IN 1, 2, or 3
: Signal flow