Table of Contents 1 Before Use..................1 1.1 Introduction ................1 1.2 Safety Instructions..............2 1.3 Safety Warnings and Precautions..........2 1.4 Parts Definition................9 1.4.1 Appearance ...............9 1.4.2 Mechanical Parts.............10 1.4.3 Key Definitions ............... 11 1.4.4 Descriptions of Touch-screen Shortcuts......12 1.4.5 Descriptions of icons on status bar ......12 1.5 Battery ..................13 1.5.1 Removing the Battery.............13 1.5.2 Installing the Battery............14...
錯誤! 尚未定義樣式。 Before Use 1.1 Introduction Thank you for choosing ZTE Corporation’s ZTE-G X760 GSM Dual-Band GPRS Digital Mobile Phone. To guarantee your mobile phone always in its best condition, please read this manual carefully and keep it for future use.
Provides audio player, camera, video player, Multimedia sound recorder, etc. Organizer Provides calculator, stopwatch, converter, etc. 1.2 Safety Instructions If your mobile phone is lost or stolen, notify your service provider immediately to prevent others from abusing it. Meanwhile you need provide your service provider with your mobile phone’s IMEI, which is printed on the label on the back of your mobile phone (appears after the battery is taken out).
Page 11
錯誤! 尚未定義樣式。 regulations while driving. Interference Do not use your mobile phone near weak signal or high-precision electronic devices. Radio wave interference may cause misoperation of an electronic device or other problems. Pay special attention when you use your mobile phone near audiphone, pacemaker and/or other medical electronic devices, fire detector, auto-door and/or other auto-control equipments.
Page 12
The mobile phone may affect the normal operation of medical apparatus, therefore please follow the relevant regulations when using your mobile phone in hospital. In Gas Station Do not use your mobile phone in gas station. Turn off your mobile phone near fuels or chemicals.
Page 13
錯誤! 尚未定義樣式。 Away from Children Keep your mobile phone from children. It may cause body injury when the mobile phone is used as a toy. Original Accessories Use the original accessories or those authenticated by the manufacturer. Using non-original accessories may affect the mobile phone’s performance, violate the warranty provisions or relevant national regulations about telecom terminals, or even cause body injury.
Page 14
Put the battery in a cool and ventilated place where there is no direct sunshine. The battery life is usually limited, and it becomes shorter and shorter after the battery is charged over and over again. If the charging fails several times, this indicates that the battery is worn out and the replacement is advised.
Page 15
錯誤! 尚未定義樣式。 Note: If the battery is damaged, please avoid contacting the materials in it. If your skin has contacted those materials, flush your skin with lots of water and seek for help from doctors if necessary. Precautions for using the charger Use the power voltage between 110VAC and 220VAC.
Page 16
Do not place heavy objects onto power cables or refit power cable because this might cause electric shock or fire. Remove power plug from the socket before cleaning and maintenance. Hold the charger rather than pull the power cable while removing the plug from the socket because this might cause damage, electric shock or fire.
錯誤! 尚未定義樣式。 1.4.3 Key Definitions Move the cursor to the left/right; Press this key to switch 3D interface; Left/right key In idle mode, press left key to enter “Write Message”, press right key to enter “Inbox”. You could change the default settings;...
1.4.4 Descriptions of Touch-screen Shortcuts In idle mode, click to enter the list of shortcuts (select 8 shortcuts from the table below), and click to return to idle mode. Icons Descriptions Icons Descriptions Dial Inbox Write Message Profiles Alarm Calendar Calculator Music Games...
錯誤! 尚未定義樣式。 Note: In this user manual, “press” means pressing the key and then releasing; “hold” means pressing and holding the key for about 2 seconds or more; “click” means clicking the corresponding icon on the screen with touch-pen. 1.5 Battery The battery can be used directly after being taken out from the package.
2. Pull the battery in the direction of the arrow as shown and take out the battery. Note: Please turn off your mobile phone before taking out the battery, otherwise your mobile phone might be damaged. 1.5.2 Installing the Battery Follow the steps below when installing the battery: 1.
Page 23
錯誤! 尚未定義樣式。 2. Put on the battery cover, and push forward in the direction of the arrow as shown until it’s locked.
1.5.3 Charging the Battery 1. Open USB interface cover at the right side of the phone, and insert the plug. 2. Connect the charger to AC power socket. When the phone is powered on, the battery capacity bar on up-right corner of the screen keeps scrolling during charging;...
錯誤! 尚未定義樣式。 Note: Put your phone in ventilated place under normal temperature during charging. Use the original charger or those authenticated by the manufacturer. Using non-original charger may cause danger and violate the warranty provisions. Charge your mobile phone in time when it is powered off automatically or prompts the lack of the power.
3. Turn off your mobile phone and remove the battery before taking out SIM card. 4. Follow the converse steps to remove SIM card. 1.7 Insert and Remove Memory Card 1. Turn off your mobile phone, remove the battery and disconnect the external power.
Page 27
錯誤! 尚未定義樣式。 3. Insert the memory card into the slot. 4. Close the clasp. 5. Secure the clasp in the direction of arrow as shown.
6. Follow the converse steps to remove the card. Turn off your mobile phone and remove SIM card before taking out the memory card. 1.8 Power On/Off Hold End key until the power-on/off animation appears. After your turn on your mobile phone, it will automatically check whether or not SIM card is inserted or usable, and shows the following information on the screen in turn: Enter Phone Lock Code: if you’ve set lock code.
Page 29
錯誤! 尚未定義樣式。 is normally 1234. Please replace it with your own PIN code as soon as possible. Search: The mobile phone will search for the available network.
Enter 3D Interface Your mobile phone provides Interface: “Communication”, “Entertainment” and “Applications”. Enter 3D interface in either of the following two methods: 1. Click OK key to enter the interface and you will find four icons on the top of the screen. Click to enter “Communication”, click enter “Entertainment”, click to enter “Applications”, and click...
Page 31
錯誤! 尚未定義樣式。 “6. Delete All”. 3. Press Down key to view “7. Preferred Storage” and “8. Information”. 4. Click it to enter the selected menu. 5. Sweep touch pen on the screen from up to down to return to the main menu.
Communication 3.1 Call 3.1.1 Make a Call Direct Dial In idle mode, click any blank space on the screen with touch pen to display the dialing keyboard, click the numeric keys to input the number and click to dial. Dial from Contact 1.
錯誤! 尚未定義樣式。 1. In idle mode, press Send key to enter “Call Logs”. 2. Click the number you want to dial in “Call Logs” and press to dial. Save number In dialing interface, input a contact's phone number, click to save as new entry, or save it into the existing entry.
In idle mode, enter “Applications” ”Settings” ”Call Setup” “Set Answer Key” ”Any Key” to set. After the setting, press any key except “End” key to answer the call. Use headset to answer If the headset is connected, you can press the key on the headset to answer the call.
Page 35
錯誤! 尚未定義樣式。 Contact: Enter “Contact”. Messages: Enter “Message”. MMS function will be disabled during the conversation due to the restriction of network occupancy. Sound Recorder: Record the current conversation. Mute: When “Mute” is on, the other party can’t hear your voice. DTMF: Turn on or off.
3.2 Messages 3.2.1 SMS Your mobile phone supports Enhanced Message Service (EMS), which allows you to insert picture, animation, cantus, sound, etc, or use template to create short message. Write Message 1. Enter “Write Message” to edit a short message. 2.
Page 37
錯誤! 尚未定義樣式。 Note: SMS centers of some cities and regions do not support a short message containing more than 70 Chinese characters (or 160 English letters). Only the mobile phone with EMS function could receive/send static icons, animated icons and music files.
Outbox 1. Enter “Outbox” to view the messages. 2. Press Up/Down key to select the message, and press “Option” to select “View”, “Edit”, “Send”, “Delete”, “Get Number”, “Copy to Phone/SIM”, or “Copy All”. Drafts 1. Enter “Drafts” to view the messages you are saved. 2.
錯誤! 尚未定義樣式。 Settings” and select one profile. Select “Edit” to set “Profile Name”, “SC Address”, “Valid Period” and “Message Type”. Note: “Valid Period”, “Fax” and “Page” need network support. Common Setting: select ON/OFF for “Delivery Report” and “Reply Path”. When “Delivery Report” is set on, the SMS center will return status report to you no matter whether or not the other party could receive your message.
Page 40
Note: MMS requires network support, therefore make sure your SIM card supports MMS before use, or consult your network provider. Make sure to complete the following operations before sending MMS: you’ve set service center number; you’ve completed WAP setting. If the MMS is too large, the mobile phone might not be able to send or receive it.
Page 41
錯誤! 尚未定義樣式。 Attachment”, “Add Slide Before”, “Add Slide After”, “Add Bookmark Text”, “Preview”, or “Slide Timing”. 2. After editing, you could select “Send Only”, ”Save and Send”, “Save to Draft”, “Send Options” or “Exit”. Inbox The MMS will be saved in the inbox. You could perform the following operations: View: View the current MMS content, and press right soft key to stop playing.
to adjust the volume. Outbox The multimedia messages will be saved in the Outbox as you select "Save and Send". Press “Option” to select “View”, “Forward”, “Edit”, “Delete”, “Delete All”, “Properties”, or “Get Number”. Draft The draft stores those messages you are not ready to send. You could edit the messages again and send later.
Page 43
錯誤! 尚未定義樣式。 “Slide Timing” and “Delivery time”. Retrieve You could set “Home network”, “Roaming”, “Read Report” and “Delivery Report”. Filter You could set “Anonymous” and “Advertisement”. Server Profile Generally, the default setting will be MMS SFR. Memory Status You could check the memory status. Note: The use of “Delivery Report”...
there is enough space to store new multimedia messages. 3.2.3 Voice Mail Server When you are unable to answer the call, you could let the other party leave a message for you through voice mail server. You could visit voice mail server to listen to the message later.
錯誤! 尚未定義樣式。 network provider. 3.3 Contacts In “Contacts”, you could save the contact’s name, telephone number, mobile phone number, etc. The numbers could be saved either in Phone or SIM card. In idle mode, use the touch-pen to enter the main menu. Under “Contacts”, you could select the following functions: 3.3.1 Quick Search Use the touch-pen to click the first letter of your desired contact on the...
If you want to add new entry to Phone, besides “Name”, “Number”, “Home Number”, etc, and you need edit the following: Caller Group Add the phone number into different caller groups. Associate Picture Set your personalized caller picture for the current number. Select the proper picture from “Phone”...
錯誤! 尚未定義樣式。 3.3.5 Copy All Select “From SIM” to copy all entries from SIM card to Phone, or select “From Phone” to copy all entries from Phone to SIM card. Note: When copying all entries from Phone to SIM card, only the name and number will be copied.
affect the actual numbers saved in SIM card. Memory Status You could check the memory status of both phone and SIM. 3.4 Call History “Missed Calls”, “Dialed Calls”, and “Received Calls” are saved in “Call History”. If the records are full, the earliest saved records will be deleted. In idle mode, press OK key to enter the main menu, and then select “Call History”.
錯誤! 尚未定義樣式。 3.4.2 Delete Call Log 1. Select “Call History” in the main menu to select “Delete Call Log”. 2. Select “Missed Calls”, “Dialed Calls”, “Received Calls” or “Delete All”. 3.4.3 Call Time Under “Call Time”, you could select “Last Call Time”, “Total Sent”, “Total Received”...
Entertainment 4.1 WAP Your mobile phone supports Wireless Application Protocol (WAP). You could get access to the services provided by your network provider. It allows you to get information about news, weather forecast, airline flights, etc. These services are especially designed for the mobile phone, and they are maintained by WAP provider.
錯誤! 尚未定義樣式。 Note: Before use, please make sure your bookmark list is not empty. In order to avoid this, a few common websites have been preset to you in your mobile phone. Recent Pages: Display the recent pages you’ve visited. If you have select the history, simply select “Goto”...
4.3 Music 4.3.1 Audio Player Your mobile supports audio file formats such as wav, mp3, mid and amr. 1. Select “Audio Player” to enter the interface, and press “Option” to select “Settings”: Pre. Play List: Select the file from “Phone” or “Memory Card”. Background Play: Select “On”...
錯誤! 尚未定義樣式。 play list, and press OK key to pause/resume. Press side keys to adjust the volume. Press Right key to play the next file, and press Left key to play the previous one. You could also perform the operations using the touch-pen: Click to play.
refer to your mobile phone. You could listen to the radio only as the headset is inserted into the mobile phone. Channel List: Edit up to 9 channels. Manual Input: Manually input a channel. Preset Auto Search: Automatically search for channels. Settings: After you turn on “Background Play”, “Loud Speaker”, “Record Format”...
錯誤! 尚未定義樣式。 Delete: Delete the selected file. Delete All: Delete all recorded files. 4.4 Video 4.4.1 Camera 1. Select ‘’Camera” to enter the preview interface, and press “Option”: Album: Enter Album to view the photos you’ve just taken; Camera Settings: Set “Shutter Sound”, “EV”, “Banding”, “Delay Timer”, and “Cont Shot”.
Click to delay the time; Click to set “Cont Shot”; Click to set “Image Quality”; Click to set “image size”; Click to complete “Capturing” and ask “Save Image?”. Note: The camera focus can not be adjusted when the image size is set maximum.
錯誤! 尚未定義樣式。 mode”. Forward: Select “To Wallpaper”, “To Contacts”, “To MMS”. Whether it can be sent or not depends on MMS space and screen size. Rename: Change the name of selected photo. Delete: Delete the selected photo. Delete All Files: Delete all photos. Sort: Select “By Name”, “By Type”, “By Time”, “By Size”...
Play: Play the select video. Select a video and use touch-pen to perform the following operations: Click or “Play” to play the video. Click or “Pause” to pause. Click “Stop” to stop playing. Click to switch to full screen, and click any space on the screen or press RSK to return to normal mode.
錯誤! 尚未定義樣式。 Under the record preview interface, you could use touch-pen to perform the following operations: Click to record a new video. Click to pause. Click “Stop” to stop recording. Press “Back” to return to previous interface. The default name of saved video shall be “MOV+ four SN number + Letter”, and the letter varies from A to Z.
provider. Your mobile phone supports STK service. If SIM card and your network provider do not support the service, this function can’t be used. 5.2 Alarm Your mobile phone could set up to 8 alarms, and it supports turn off alarm. 1.
錯誤! 尚未定義樣式。 To do List for current date will be displayed on the idle screen after adding a new task and turning on “Alarm”. Click it to view the details. 5.3.2 Calculator Your mobile phone provides a calculator to perform simple calculations. You could add, subtract, multiply or divide, and select M+, M-, MR, and MC to perform relevant operations.
5.3.4 Convertor Unit Converter Your mobile phone provides you with unit converter to convert the weight and length. Input the value to perform the conversions, such as from Kg to Pound, from Kg to Ounce, from Km to Mile, and from M to Yard. Currency Converter Your mobile phone provides you with basic functions regarding currency conversion.
錯誤! 尚未定義樣式。 Select a file and press “Option” to select: View: This option appears only when the phone supports the files. Play: This option appears only when the phone supports multimedia files. Forward: Select “To MMS” or to receive your file. Detail: Display the last revised date and file size.
5.5.2 User Profiles Your mobile phone provides multiple profiles, which allows you to perform personalized settings of “Incoming Call Alert”, “Alarm”, “Message Alert”, “Keypad Tone”, “Alert Tone” and “Power on Volume” according to different occasions. The optional profiles include “General”, “Silent”, “Meeting”, “Outdoor”, “Flight”, and you could also customize the profiles.
錯誤! 尚未定義樣式。 phone will slightly vibrate when you press the keys or click the icons. LCD Backlight You could set the duration and brightness for LCD backlight. Time and Date You could set “Date”, “Time”, “Date Format” and “Time Format”. Scheduled Power On/Off You could edit up to 4 groups of power on/off time.
You could set the language as “French” or “English”. Handwriting You could set “Pen Speed” and “Pen Color”. 5.5.4 Call Setup Call Waiting After this function is activated, the system will inform you if there is another incoming call. Please contact your network provider for details. Call Divert This function allows you to divert incoming call to another designated number.
錯誤! 尚未定義樣式。 Deactivate: Cancel call divert. Query Status: Check the status of the function. Speed Dial Enable Speed Dial: Turn on/off speed dial. Set Number: You could edit 8 phone numbers for numeric keys 2~9. In idle mode, hold numeric keys 2~9 to dial the corresponding number.
“Automatic” or “Manual”. GPRS Connection Press left soft key “Change” to switch between “When Needed” and “Always”. Data Account GSM Account Under “GSM Account”, the list of data accounts is displayed. Select one account, press “Edit” to edit the following items: Account Name: Edit the account name.
錯誤! 尚未定義樣式。 In “GPRS Account”, press OK key to display the list of data accounts. Select one account, press “Edit” to edit the following items: Account Name: Edit the account name. APN: Input APN. User Name: Edit the user name for APN server, the default value is empty.
Page 70
Note: Your SIM card will be locked if you enter wrong PIN code continuously for three times. In this case you need PUK code to unlock your SIM card. The PIN code, PUK code and SIM card may be provided to you all together.
錯誤! 尚未定義樣式。 Call Barring Note: Please contact your network provider for details since some providers might not provide call barring service. When applying for this service, you will get a four-digit password provided by your provider to activate call barring. Press “Call Barring”...
Mode: Input PIN2 code to turn ON/OFF Fixed Dial function. Fixed Dial List: Edit a maximum of 10 fixed dial numbers. Press “Option” to select “Edit” or “Find in PHB”. Note: You need input PIN2 code to turn on/off fixed dial function. Please contact your network provider to get PIN2 code.
錯誤! 尚未定義樣式。 USB Data Function 6.1 Mass Storage Mass storage indicates your mobile phone supports mobile storage. As the phone is turned off, connect your mobile phone with PC through USB data cable. In this case, your mobile phone can be used as U disk.
As the phone is turned on, connect your mobile phone with PC through USB data cable. In this case, your mobile phone will display “Webcam”. Select “Webcam”, press “OK”, and a full-screen camera interface will appear. This indicates your mobile phone could be used as webcam now.
錯誤! 尚未定義樣式。 7.2 Keypad Definitions Virtual Keypad Under the editing interface, click the icon at the bottom of the screen to switch the input method. You could use handwriting pen to input manually or click virtual keypad to enter. In this case, the current input method will appear at the left-up corner of the screen.
7.3.2 French Input Method French Input Method includes uppercase input and lowercase input. 1. Input French letters. Click the corresponding letters to input your desired word. 2. Click the screen to move the cursor. 3. Click to input space. 4. Click to delete the last input.
錯誤! 尚未定義樣式。 2. Click to input space. 3. Click to delete the input number. 7.3.5 Symbol Input Method Click to open virtual keypad and select the corresponding symbols to input.
Appendix 8.1 Special Functions As a type of multimedia mobile phone, your mobile phone supports not only the basic functions, but rich and practical multimedia functions as below: Touch screen Touch screen provides you with much more user-friendly interface. All you have to do is a simple click.
Page 79
錯誤! 尚未定義樣式。 Your mobile phone supports the display of txt format. You could browse your favorable books at any time. Contacts Your mobile phone supports card holder phonebook, personalized ringtone and photo. You could select three numbers from contact as common numbers on the dialing interface.
Your mobile phone support camera function. Video Player Your mobile phone support video playing function. Video Recorder Your mobile phone support video recording function。 Network Service Your mobile phone support WAP service. You could get access to Internet through WAP browser to obtain as much information as you can. Input Methods Your mobile phone supports multiple input methods, which enable users to input French letters, English letters, numbers, symbols, etc.
錯誤! 尚未定義樣式。 In idle mode, press LSK and RSK, or sweep your finger or touch pen on the screen from left to right to unlock the keypad. Desktop shortcuts You could set 8 icons on the idle screen such as “Call”, “Inbox”, “User Profiles”, “Alarm”, “Calendar”...
Page 82
metal objects, which may hurt people or damage the phone. Keep your mobile phone dry. Rain, moisture or any kind of liquid containing minerals might corrupt the circuit. Do not touch the mobile phone with wet hands because this might cause electric shock, which would hurt people or damage the phone.
錯誤! 尚未定義樣式。 Failure Analysis Symptoms Possible Causes Solutions Inadequate battery Charge the battery Unable to turn capacity on the phone Poor contact Reinstall the battery Automatic Seriously poor battery Recharge the battery capacity power-off Deceasing of battery Replace the battery performance Inadequate standby time...
FCC Regulations This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
錯誤! 尚未定義樣式。 -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.
Page 86
SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID: Q78-X760. For body worn operation, this phone has been tested and meets the FCC...
Page 87
錯誤! 尚未定義樣式。 RF exposure guidelines for use with an accessory that contains no metal and the positions the handset a minimum of 1.7 cm from the body. Use of other enhancements may not ensure compliance with FCC RF exposure guidelines. If you do no t use a body-worn accessory and are not holding the phone at the ear, position the handset a minimum of 1.7 cm from your body when the phone is switched on.
Need help?
Do you have a question about the X760 and is the answer not in the manual?
Questions and answers