Related Manuals for YEONHWA M TECH XR-150
Summary of Contents for YEONHWA M TECH XR-150
- Page 1 XR-150/XR-450 Portable Radio Manual * This Service manual is subject to change according to improvement of XR-150/XR-450 Portable Radio without notice. * Version #2 (2009-06-09)
-
Page 2: Table Of Contents
9.3 XR-450 --------------------------------- Thank you for your purchase of the XR-150/XR-450 Series Radio. 1. Before using the Radio, please read the enclosed user guide in details. The functions and specifications are subject to be changed without notice for improvement of the... - Page 3 RADIO FREQUENCY ENERGY SAFETY INFORMATION Your Xradio radio generates RF electromagnetic energy during transmit mode. This radio is designed for and classified as “Occupational Use Only”, meaning it must be used only during the course of employment by individuals aware of the hazards, and the ways to minimize such hazards.
- Page 4 transmitting and only use the Xradio belt-clip which is listed in instructions when attaching the radio to your belt, etc., to ensure FCC RF exposure compliance requirements are not exceeded. To provide the recipients of your transmission the best sound quality, hold the antenna at least 5 cm (2 inches) from your mouth, and slightly off to one side.
- Page 5 AVOID using or placing the transceiver in direct sunlight or in areas with temperatures below –30°C (–22°F) or above +60°C (+140°F). DO NOT modify the transceiver for any reason. MAKE SURE the flexible antenna and battery pack are securely attached to the transceiver, and that the antenna and battery pack are dry before attachment.
-
Page 6: Features
1. Feature The XR-150/XR-450 series Radio is developed to be user-friendly and compact design, to have various features and to use at the construction / industrial / public areas for the safety & convenience of users. The followings are the main features of the XR-150/XR-450 Series Radio. -
Page 7: Components Of Xr-150/Xr-450 Series Radio
2. Components of XR-150/XR-450 Series Radio * Components could be changed by buyer request. Figure 3-1) standard components of XR-150/XR-450 series Radio... -
Page 8: Appearance Of Xr-150/Xr-450 Series Radio
3. Appearance of XR-150/XR-450 Series Radio Figure 3-1) Appearance of XR-150/XR-450 Series Radio... -
Page 9: Basic Operation Of Xr-150/Xr-450 Series Radio
Figure 3-2) XR-150/XR-450 Series LCD Indication 4. Basic Operation of XR-150/XR-450 Series Radio Pease read this manual carefully before using XR-150/XR-450 series Radio. This manual contains important information about using Radio. 4.1 Installation and Removing the Antenna To install the antenna, insert the antenna into antenna connector and screw the antenna clockwise. To remove the antenna, screw the antenna counter clockwise. -
Page 10: Installation And Removing The Battery
4.2 Installation and Removing the Battery 4.2.1 Installation of the battery -. To install battery, slide up the battery towards the top of the radio until battery latch is locked. 4.2.2 Removing the Battery -. Slide the battery latch located on the bottom of radio to the open position as shown in Figure 4-2. -. -
Page 11: Accessory Connector
Accessory connector is used to connect external speaker Mic, and headset, etc. Please close the cover when nothing is connected. Figure 4-4) Accessory connector 4.5 Operating XR-150/XR-450 RADIO 4.5.1 ON/OFF/Volume Control Turns the radio on and off and adjusts audio volume level. -
Page 12: Emergency Button
5. Charging the Battery 5.1 Safety Notes 1) The radio of XR-150/XR-450 series receives power from high-performance Li-ion battery(XSB-2400). XSB-2400 Battery is safe of high performance and highly reliable, and could be charged very fast. XSB-2400 Battery has been designed suitably only for the charger of Yeonhwa M Tech(DC-1000/DC-2000). - Page 13 Detecting error Red LED is off. After charging Green LED lights. When charging Green LED lights 5.4 Charger (DC-1000/DC-2000) The DC-1000/DC-2000 charger is designed to charge only the Li-ion battery enclosed in this Radio. Figure 5-2) Chargers for XR-150/XR-450 Series...
-
Page 14: Operating Instructions Of Xr-150/Xr-450 Series Radio
: 90(W)x105(D)x37(H)m/m • Charging : 750mA(Fast charging) 6. Operating Instructions of XR-150/XR-450 Series Radio 6.1 Power On/Off Turn Power switch clockwise. As soon as power is supplied, the backlight will be turned on. If the user had set up the user ID, it will be displayed on the LCD and radio will enter into the latest state as a signal sound is generated. -
Page 15: Changing Channels
6.3 Reception Method The user should not press PTT button during the reception. The user can adjust the volume by Volume switch, and during reception, the green LED will be turned on. Depending on conditions of the transmitting radio, 6.4 4 Changing Channels Channel buttons (▼,▲) are to change channels. -
Page 16: Priority Scan
6.6.2 Priority Scan At the Priority Scan mode, the LCD displays ‘SCAN’ and ‘P-‘ icons. The Radio scans the channel in the sequence of CH1, P, CH2, P, CH3, … at the priority scan mode. During receiving signal through the common channel, the Radio scans the priority channel periodically and if the Radio detects the Priority channel, it starts receiving the channel. - Page 17 1) 1:1 Call at call mode Press the “Enter” button for a long period(about 2seconds) at the general mode in order to enter into the call mode. ① Select your party to call by using the channel button (▲, ▼). If you ( ID : 12345 ) want to call your party(ID : 54321), select him(ID : 54321) by using the channel button (▲,▼) at the call mode.
- Page 18 Figure 6-10) Group Call 3) RESET This Reset function converts the TX/RX with no restriction to the previous Close mode. Press the Monitor button (M) at the call mode. ① The call signal will be transmitted to the party’s Radio with the ID number + “C” tone. ②...
- Page 19 The CLONING is to copy the data such as Frequency/Tone/Scan into the other Radio. * Cloning Method ① First, please prepare the Clone cable for XR-150/XR-450 Series Radio. ② The original Radio should be turned on with pressing the PTT button and the Radio to be copied should be turned on with pressing the “...
-
Page 20: Menu Description
6.13 Menu description If pressing the "P" button on the side for 2 seconds, the Radio will be in Menu mode. The Menu mode consists of 9 Menus and you can use your desired Menu after selection. ☞ Caution) After entering into the Menu, if you don’t operate the Menu for more than 8 seconds, the Menu mode will be terminated automatically and it is converted to the Receiving mode. - Page 21 6.13.3 ID output This is for transmission of your ID and reception of your party’s ID. ID is divided by DTMF and Call ID. Especially the Call ID transmits your ID to the party and also, the party’s ID is displayed on your Radio to use your Radio in convenience and efficiently.
- Page 22 ③ Select On(y) or Off (n) by pressing Channel buttons (▼,▲), and save the selected status by pressing Enter button( ④ Exit Menu mode by pressing Menu Button(P) button. Select “Off”. Then, the “ SCR “ symbol will disappear on the LCD 6.13.5 Set Squelch Squelch sensitivity level is selectable by 5step.
- Page 23 Enter button( 4. Exit Menu mode by pressing Menu Button(P) button. Select “Off”. Then, the “ “ symbol will disappear on the LCD. 6.13.7 Set VOX Set VOX is to enable users to make transmission for VOX without pressing PTT button. (This function could be available with Ear Mic [External VOX]).
- Page 24 6.13.9 Set Repeater If you want to use the XR-150/XR-450 Series Radio as a repeater, you can operate the Repeater by On / Off. The Repeater function should be set up by PC program and if not, at the Menu mode the Repeater set-up is not shown.
-
Page 25: Precautions
7. Precautions 7.1 When using the XR-150/XR-450 Series Radios Don’t remove the antenna from the Radio or don’t transform the antenna or don’t make any change on the antenna. The strong electronic wave to be emitted from the Radio can have an effect on the performance of the Radio and can cause the Radio to have a defect. -
Page 26: Safety Notes
In case of the area that medical equipments are being used, please use the Radio after discussion with the equipment maker or the related doctor. Please don’t use the Radio at the place where computer or the other electric/electronic devices are being used, because the strong electronic wave from the Radio can have an effect on the equipments. -
Page 27: Specification
9. Specification 9.1 XR-150 General Frequency Range VHF: 136 ~ 174 MHz Frequency Stability ±2.5PPM (-30 to +60℃) Programmable Channels 512 Channels/16 Group Channel Spacing Dual Channel Spacing 12.5/25 KHz Dimensions 103mm (H)×52mm (W)×32mm (D) Weight 250g (with Battery pack & Antenna) Power Source DC +7.5V rechargeable Li-ion 2200㎃H battery pack... -
Page 28: Xr-450
9.2 XR-450 General Frequency Range XR-450 : 400 ~ 512 MHz ±2.5PPM (-30 to +60℃) Frequency Stability 512 Channels/16 Group Programmable Channels Dual Channel Spacing 12.5/25 KHz Channel Spacing 103mm (H)×52mm (W)×32mm (D) Dimensions 250g (with Battery pack & Antenna) Weight DC +7.5V rechargeable Li-ion 2200㎃H battery pack Power Source...