Related Manuals for YEONHWA M TECH XR-2400
Summary of Contents for YEONHWA M TECH XR-2400
- Page 1 XR-2400 User’s Manual Zigbee UHF Transceiver * This Service manual is subject to change according to improvement of XR-2400 Portable Radio without notice. * Version #1 (2011-08-14)
-
Page 2: Table Of Contents
Table of Contents 1. XR-2400 Features -------------------------------------------- 2. Components of XR-2400 Series Radio ---------------------------------- 3. Appearance of XR-2400 Radio ----------------------------------------- 4. Basic Operation of XR-2400 ---------------------------------------------- 5. Operating XR-2400 Radio --------------------------------------------- 6. Operating Instructions of XR-2400 Radio --------------------------------- 7. FCC information ---------------------------------... -
Page 3: Xr-2400 Features
1. XR-2400 Features The features of XR-2400 are various as below. XR-2400 can used under tough industrial environments as well as public places. XR-2400 series have following functions: 16 Channels are selectable. High-Quality Audio Output(Ø40 Speaker) PLL synthesizer type ... -
Page 4: Components Of Xr-2400 Series Radio
2. Components of XR-2400 Series Radio * Components could be changed by buyer request. Figure 2-1) standard components of XR-2400 Radio... -
Page 5: Appearance Of Xr-2400 Radio
3. Appearance of XR-2400 Radio Figure 3-1) Appearance of XR-2400 Radio... -
Page 6: Basic Operation Of Xr-2400
Figure 3-2) XR-2400 Series LCD Indication 4. Basic Operation of XR-2400 Pease read this manual carefully before using XR-2400 series Radio. This manual contains important information about using Radio. - Page 7 4.1 Installation and Removing the Battery 4.1.1 Installation of the battery To install battery, slide up the battery towards the top of the radio until battery latch is locked. 4.1.2 Removing the Battery - Slide the battery latch located on the bottom of radio to the open position as shown in Figure 4-2.
-
Page 8: Operating Xr-2400 Radio
Accessory connector is used to connect external speaker/Mic, and headset, etc. Please close the cover when nothing is connected. Figure 4-4) Accessory connector 5. Operating XR-2400 Radio 5.1 On/Off/Volume Control Turns the radio on and off and adjusts audio volume level. - Page 9 5.6. Charging the Battery 5.6.1 Safety Notes 1) The radio of XR-2400 series receives power from high-performance Li-ion battery (XSB-1800). XSB-1800 Battery is safe of high performance and highly reliable, and could be charged very fast. XSB-1800 Battery has been designed suitably only for the charger of DC-100.
- Page 10 Figure 5-1) Charging the Battery 5.6.3 How to Charge 1) Plug the DC-100 charger into the electricity power outlet. 2) When charging the Radio with the battery installed, please turn off the power of the Radio and place the Radio on the charger (The charger has a slide slot.). After completion of the charging, the green LED on the charger will light.
-
Page 11: Operating Instructions Of Xr-2400 Radio
: 76(W)x85(D)x37(H)m/m • Charging Current : 750mA(Fast charging) 6. Operating Instructions of XR-2400 Radio 6.1 Power On/Off Turn Power switch clockwise. As soon as power is supplied, the backlight will be turned on. If the user had set up the user ID, it will be displayed on the LCD and radio will enter into the latest state as a signal sound is generated. -
Page 12: Fcc Information
of the transmitting radio, 6.4 Changing Channels Channel buttons (▼,▲) are to change channels. Press Up button (▲). Then, “beep” sound will be generated and the channel number will be increased. Or press Down button (▼) to decrease the channel. If the user presses Up or Down button while only one channel is set, the channel will not be changed and a different sound from “beep”... - Page 13 9. WARNING This transceiver generates RF EME while transmitting. RF EME(Radio Frequency Electric & Magnetic Energy)has the potential to cause slight thermal, or heating effects to any part of your body less than the recommended distance from this radio transmitter's antenna. RF energy exposure is determined primarily by the distance to and the power of the transmitting device.
Need help?
Do you have a question about the XR-2400 and is the answer not in the manual?
Questions and answers