Ota And Dfu Mode; Ota Sequence - Sony A1ll User Manual

12

OTA and DFU mode

30 / 55
UXP X CONFIDENTIAL 2014-12-05
12.1

OTA sequence

ASW237 ASW136 ASW102 ASW101
The different modes during a OTA sequence have the same LED
indication, constant white blinking. When the update is completed A1II
enters bonding mode and AHA can reconnect.
Firmware update shall not be possible if the battery level is too low,
A1II must then indicate this to AHA.
LED A
600 ms 600 ms 600 ms 600 ms 600 ms 600 ms 600 ms 600 ms
Enter OTA Connection is established Transmission started Transmission completed Restart and enter bonding mode AHA connects to A1II
12.1.1 OTA sequence.
UXC IxD Blueprint