Table of Contents
Advertisement
11
Turning OFF and Factory data reset
11.1
Turning OFF A1ll
The user needs to very long press the key in order to turn A1ll OFF . If there is a HRV
measurement going on then the HRV should be interrupted and the device should
be turned off.
11.1.1
Very Long press the
key to turn off A1ll
LED C
LED B
LED A
500 ms
500 ms
500 ms
11.1.3
Power OFF sequence.
The power OFF sequence uses white
LEDs.
11.1.2
All three LEDs are lit
and then turned off, one by
one.
11.2
Factory data reset
Factory data reset can only be done from power OFF mode. A more than 10 second
long press (very very long press) generates a factory data reset. Factory data reset
will clear all data but not roll back firmware updates. After factory data reset A1ll
automatically starts up in bonding mode. Factory data reset is the only way to
connect A1ll to a new device if already bonded to another device.
UXP X
CONFIDENTIAL
2014-12-05
ASW250 ASW236 ASW067 ASW024
UXC
29 / 55
IxD Blueprint
Advertisement
Table of Contents
