UBX UBR510B Instruction Manual page 12

INPUT MODES
6. Bluetooth Operation
Connect wirelessly to the unit using Bluetooth technology and play music through the home
theatre's speakers.
Example: iPhone connecting to the unit to play music via Bluetooth
1). Make sure that the iPhone is turned on and has music ready to play on the iPod app.
2). On the iPhone, turn Bluetooth on and start scanning for available Bluetooth devices.
3). Switch to Bluetooth input by pressing
4). Press the
on the iPhone's list of detected devices.
5). Choose to pair with BT-DEVICE.
6). The pairing should now be complete.
7). Start playing music on the iPhone and the audio will be transmitted wirelessly through the home
theatre's speakers.
8). The
connected Bluetooth device also.
9). Adjust the master and/or surround speaker volumes as desired.
- If the BT button is pressed again, the pairing will be disconnected and the unit
becomes available to connect to a different device.
- Bluetooth range can be affected by interference and obstacles which may also cause
NOTICE
the wireless audio connection to break up. For best results, avoid interference and obstacles.
- After pairing and playing a Bluetooth device, still video from a HDMI device can be shown
on TV if it is still connected and powered on. Then, just change the TV's input or turn TV off.
11
Pairing
button on the remote control. At this moment,
/ / buttons on the remote control can be used to control playback on the
BT
on the remote control.
BT-DEVICE will show up