Product Description; Operation; Helpful Hints And Tips - Zanussi ZEE3921I User Manual

Product description

Cooking surface layout
Electric cooking zones control knobs
Symbol
0

Operation

To switch on and increase the heat setting turn
the knob counterclockwise. To decrease the
heat setting turn the knob clockwise. To switch
off turn the knob to the 0.
Power indicator is activated when either of the
zones are turned on, and will stay on until the
cooking zones are switched off.
Before first use
Put cookware containing water on each cook-
ing zone, set the maximum position and operate
the appliance for 10 min. This is to burn off the
residue in the appliance. After that, operate the
appliance at minimum position for 20 min. Dur-

Helpful hints and tips

Energy saving
• If possible, always put the lids on the
cookware.
• Put cookware on a solid hotplate before
you start it.
• Stop the solid hotplate before the end
of the cooking time to use residual heat.
14
1
180
mm
145 2
mm
3
4
Function
off position
Rear cooking zone 1500 W
1
Front cooking zone 1000 W
2
Power indicator
3
Control knobs
4
Symbol
1
6
ing this period, an odour and smoke can occur.
This is normal. Make sure that the airflow is suf-
ficient.
Rapid hot plate
A red dot in the middle of the plate shows a
rapid hot plate. A rapid hot plate heats up faster
than usual plates.
The red dot is painted on the surface and can
come off after some time. It does not have an
effect on the performance of the appliance.
The rapid hot plate can smoke and make an
odour when you use it for the first time. The
smoke and an odour will go off after a while.
• For satisfactory results, the diameter of
pans and cooking zones must have the
same dimensions.
Cookware
• The bottom of the cookware must be as
thick and flat as possible.
Function
minimum heat
maximum heat
www.zanussi.com