Understanding The Jumpshot Cable's Led Activity Indicator Signals - Lexar jumpshot Quick Start Manual

Understanding the JumpShot Cable's LED Activity
Indicator Signals
A steady green LED Activity Indicator signal means a functional USB-
Enabled CompactFlash card has been inserted into the JumpShot cable
(functional USB-Enabled card, but no read or write activity currently
taking place).
NOTE: If the LED Activity Indicator does not turn on when a card has been
inserted, this may indicate that the card is not supported in JumpShot. This
card may not be an USB-Enabled CompactFlash card or that your USB-
Enabled card is damaged.
A blinking green LED Activity Indicator signal means data is being
transferred to or from the USB-Enabled CompactFlash card (read or write
activity), or initial recognition of USB-Enabled CompactFlash.
CAUTION: Do not remove the CompactFlash card while the LED Activity
Indicator is blinking. Doing so may damage the CompactFlash and cause of
loss of data/images.
4 4 4 4