Installing The Jumpshot Connectivity Kit; Windows 98; Macintosh - Lexar jumpshot Quick Start Manual

Installing the JumpShot Connectivity Kit

Windows 98

Insert the Lexar Media JumpShot CD-ROM (Fig 1).
Connect the JumpShot cable to an available USB port
on your computer or USB hub (Fig 2).
Insert the USB-Enabled CompactFlash card into the
JumpShot cable (Fig 3).
The Windows "Add New Hardware Wizard" will appear.
Follow the on-screen prompts to install the JumpShot
driver for Windows and click "Finish" once the
installation is complete.
The drive icon for the USB-Enabled CompactFlash
card will appear in "My Computer".

Macintosh

Insert the Lexar Media JumpShot CD-ROM (Fig 1).
Open the "Lexar Media JumpShot" Folder.
Double-click on the "Lexar Media JumpShot Installer"
icon and follow the instructions onscreen.
Click on "Restart" when prompted.
2 2 2 2
Figure 1
Figure 2
Figure 3