Cisco ASR 1013 Installation Manual page 28

Connecting the Console and Auxiliary Port Cables
Figure 12: Cisco ASR 1000 Series Route Processor Faceplate Connectors
1
2
3
The Cisco ASR 1013 Router uses RJ-45 ports for both the auxiliary port and the console port. Both the console
and the auxiliary ports are asynchronous serial ports; any devices connected to these ports must be capable
of asynchronous transmission.
For console and auxiliary port pinouts for the RJ-45 connector, see the
Specifications" section on page B-1
SUMMARY STEPS
1. Before connecting a terminal to the console port, configure the terminal to match the chassis console port
as follows: 9600 baud, 8 data bits, no parity, 1 stop bits (9600 8N1).
2. After you establish normal router operation, you can disconnect the terminal.
DETAILED STEPS
Step 1 Before connecting a terminal to the console port, configure the terminal to match the chassis console port as follows:
9600 baud, 8 data bits, no parity, 1 stop bits (9600 8N1).
Step 2
After you establish normal router operation, you can disconnect the terminal.
Cisco ASR 1000 Series Router Hardware Installation Guide
28
CARRIER LED 4
BITS connector 5
LINK LED 6
. Both ports are configured as asynchronous serial ports.
Cisco ASR 1013 Router Overview and Installation
MGMT Ethernet
connector
CON connector
AUX connector
"Cisco ASR 1000-RP1 Pinout