Voice Recognition For The Radio - Chevrolet Camaro MyLink Infotainment System 2017 Manual

can be made by manually selecting
the item, or by speaking the line
number for the item to select.
When a screen contains a list, there
may be options that are available
but not displayed. The list on a
voice recognition screen functions
the same as a list on other screens.
Scrolling or flinging can be used to
help display other entries from
the list.
Manually scrolling or paging the list
on a screen during a voice
recognition session suspends the
current voice recognition event and
plays the prompt Make your
selection from the list using the
manual controls or press the Back
button to try again.
If manual selection takes more than
15 seconds, the session terminates
and prompts that it has timed out.
The screen returns back to the
screen where voice recognition was
initiated.
The Back Command
0
Say Back or touch
the previous screen.
If in voice recognition, and Back is
stated all the way through to the
initial screen, then Back is stated
one more time, the voice recognition
session will cancel.
Help
Say Help on any voice recognition
screen and the help prompt for the
screen is played. Additionally, a
pop-up displays a text version of the
help prompt. Depending on how
voice recognition was initiated, the
Help pop-up will either display on
the instrument cluster or the
infotainment display. Touch the
Dismiss button to make the pop-up
go away.
g
Pressing
playing will terminate the prompt
and a beep will be heard. Doing this
will stop the help prompt so that a
voice command can be used.
Voice Recognition for the
Radio
Some audio screens have a voice
recognition button (
to go to
audio voice recognition. If the voice
while the help prompt is
g
) to launch
Voice Recognition
button is touched in a radio screen,
the voice commands for radio and
media features are available.
Switch to AM : Switch bands to
AM and tune to the last AM radio
station.
Switch to FM : Switch bands to
FM and tune to the last FM radio
station.
Switch to DAB : Switch bands to
DAB and tune to the last DAB radio
station.
Tune to <AM frequency> AM :
Tune to the radio station whose
frequency is identified in the
command (like "nine fifty").
Tune to <FM frequency> FM :
Tune to the radio station whose
frequency is identified in the
command (like one o one
point one ).
Tune to <DAB frequency>
DAB : Tune to the radio station
whose frequency is identified in the
command (like one o one
point one ).
49