Destination; Autozoom - Chevrolet Camaro MyLink Infotainment System 2017 Manual

28 Navigation
The destination symbol marks the
final destination after a route has
been planned.
The waypoint symbol marks one or
more set waypoints.
A waypoint is a stopover destination
point added to the planned route.
The estimated time to the
destination displays. Touch the
Arrival button to toggle between
duration and distance to the

destination.

This symbol indicates the
recommended manoeuvre that
should be performed. Touch it to
display the turn list or waypoint list.
The No GPS symbol appears when
there is no Global Positioning
System (GPS) satellite signal. When
the GPS is gone, the vehicle
position on the map may not be
accurate.

Autozoom

As a manoeuvre is being
approached, the map automatically
zooms in to give greater detail.
If lane guidance is available for the
manoeuvre, this is also shown.
When the system begins to
autozoom, it zooms in to its
minimum level. After the manoeuvre
is performed, the system slowly
zooms back out.
Destination
If route guidance is not active, touch
NAV on the Home Page to access
the map view. Touch the Destination
icon from the map view to enter a
destination. Available methods of
entering a destination are Voice
Recognition, Address, Recent
Destination, Contacts, and POIs.
Several options can be selected to
plan a route. Some destination
items may be greyed out if no
destination was previously entered
or saved.