Installing The Batteries; Using The Controller - Samsung ET-YO324 Quick Start Manual

Installing the batteries

1. Insert batteries with the positive and negative
terminals properly aligned with the + and -
symbols on the controller.
2. Place the battery cover on the controller and
slide the battery cover back until it clicks back
into place.
•
If the indicator light flashes red while
using the controller, replace the
batteries.
•
Do not recharge the provided batteries
(AAA batteries).

Using the controller

Controller
1.
enter Bluetooth pairing mode.
The indicator light will flash red, green, and
blue.
Mobile device
2.
the Bluetooth feature, tap Gear VR
Controller(0000) on the list of available
devices to complete Bluetooth pairing.
The indicator light will flash blue three times.
6
Press and hold the Home key to
After activating