HPE 5920 series Command Reference Manual page 16

Syntax
display arp [ [ all | dynamic | multiport | static ] [ slot slot-number ] | vlan vlan-id | interface
interface-type interface-number ] [ count | verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
all: Displays all ARP entries.
dynamic: Displays dynamic ARP entries.
multiport: Displays multiport ARP entries.
static: Displays static ARP entries.
slot slot-number: Specifies an IRF member device by its member ID or a PEX by its virtual slot
number.
vlan vlan-id: Displays the ARP entries for the specified VLAN. The VLAN ID is in the range of 1 to
4094.
interface interface-type interface-number: Displays the ARP entries for the interface specified by the
argument interface-type interface-number.
count: Displays the number of ARP entries.
verbose: Displays detailed information about ARP entries.
Usage guidelines
This command displays information about ARP entries, including the IP address, MAC address,
VLAN ID, output interface, entry type, and aging timer.
If you do not specify any parameters, the command displays all ARP entries.
Examples
# Display all ARP entries.
<Sysname> display arp all
Type: S-Static
IP Address
20.1.1.1
193.1.1.70
192.168.0.115
192.168.0.39
22.1.1.1
# Display detailed information about all ARP entries.
<Sysname> display arp all verbose
Type: S-Static
IP Address
Vpn Instance
20.1.1.1
[No Vrf]
193.1.1.70
[No Vrf]
D-Dynamic O-Openflow
MAC Address VLAN
00e0-fc00-0001 N/A
00e0-fe50-6503 100
000d-88f7-9f7d 1
0012-a990-2241 1
000c-299d-c041 10
D-Dynamic O-Openflow
MAC Address VLAN
00e0-fc00-0001 N/A
00e0-fe50-6503 100
M-Multiport
Interface
N/A
XGE1/0/1
XGE1/0/2
XGE1/0/3
N/A
M-Multiport
Interface
N/A
XGE1/0/1
7
I-Invalid
Aging Type
N/A S
N/A IS
18 D
20 D
N/A M
I-Invalid
Aging Type
N/A S
N/A IS