Download Print this page

Contents Of The Package; Safety Notes; Installation - Cellphone-Mate CM2020 68 dB User Manual

Universal building repeater

Advertisement

CONTENTS OF THE PACKAGE

1. CM2020 68 dB Amplifier with connectors: N female type
2. Mounting Kit
3. 110V AC Power Adaptor
4. User Manual (this document)
The following items need to be purchased separately before installation:
1.
Dome antenna or other type of indoor antenna.
2.
Yagi antenna or omni-directional antenna for outdoor use.
3.
Low loss RF cable that connects indoor antenna with the repeater, length depends on actual situation.
4.
Low loss RF cable that connects outdoor antenna with the repeater, length depends on actual situation.
For further help, please consult the Cellphone-Mate website (www.Cellphone-Mate.com) or call toll free at 888-365-MATE.

SAFETY NOTES

fdgbsddg
The human body should always be separated from the indoor antenna of the Amplifier by at least 25cm (10").
Don't expose this product to extreme high or low temperature. For example, putting the Amplifier under direct sunshine for too long may
cause it to overheat, thereby damaging the electronic components inside.
There are no consumer serviceable or modifiable parts inside this Amplifier product. Alteration or abuse of the Amplifier or
other components will void this product's warranty, and could be dangerous to the user.
NOTE: The wireless amplified can also be used for boat and other applications, but not recommended for small vehicles since
there is no enough separation between inside and outside antenna.

INSTALLATION

INSTRUCTIONgbsddg
Warning: Never power on the units before completion of the installation.
The signal is received by the outside antenna from the cell tower, then AMPLIFIED and transmitted to your phone through the inside
antenna. When the phone transmits, the signal is received by the inside antenna, then AMPLIFIED and transmitted to the cell tower
through the outside antenna.
STEP 1. Install the CM2020 68 dB on the wall with the mounting kits supplied.
STEP 2. Connect the Inside Antenna to the side that shows "Indoor Ant.".
STEP 3. Connect the Outside Antenna: Select an outside mounting location. For best performance, try to keep the antenna on top of the
roof. The outside antenna should be located in an area with at least a 12" radius clear of obstructions, and other radiating elements.
fdgbsddg
Cellphone-Mate Inc.
CM2020 68dB Manual
2

Advertisement

loading