When the phone transmits, the signal is received by the inside antenna, then AMPLIFIED and transmitted to the cell tower through the outside antenna. STEP 1. Install the CM2020 68 dB on the wall with the mounting kits supplied. STEP 2. Connect the Inside Antenna to the side that shows “Indoor Ant.”.
Cellphone-Mate Inc. CM2020 68dB Manual NOTE: Keep the separation distance between the inside and outside antennas to at least 80 ft apart to avoid RF oscillation. If not, then the amplification gain must be reduced with gain control switches on both side of the unit for uplink and downlink.
WARRANTY 1. Cellphone-Mate, Inc. warrants to the Buyer that each of its products when shipped will be free from defects in material and workmanship and will perform in full accordance with applicable specifications. The limit of liability under this warranty is, at Cellphone-Mate, Inc.’s option, to repair or replace any product or part thereof which shall within ONE YEAR of purchase as...
Page 5
Cellphone-Mate Inc. CM2020 68dB Manual ANY, RECEIVED BY CELLPHONE-MATE, INC. FOR THE UNIT OF PRODUCT OR SERVICE FURNISHED OR TO BE FURNISHED, AS THE CASE MAY BE, WHICH IS THE SUBJECT OF CLAIM OR DISPUTE. IN NO EVENT SHALL CELLPHONE-MATE, INC. BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, OR SPECIAL DAMAGES, HOWSOEVER CAUSED.