Initial Start-Up; Using The Abus Ip Installer For Camera Search - Abus IPCA22500 User Manual

7. Initial start-up

7.1 Using the ABUS IP Installer for camera search

Install and start up the ABUS IP Installer using the enclosed software CD (or alternatively using
the ABUS website www.abus.com, available for each respective product).
The IP camera should now appear in the selection list without the relevant IP address for the
target network, where appropriate. The IP settings for the camera can be changed using the IP
installer.
The language preference for the camera can also be changed using the ABUS IP installer. This
will change the language preference for the master and installer users at the same time (for an
explanation of master/installer, see chapter "User accounts and passwords"). Individual language
preferences can be amended in the settings menus for master and installer.
Please be aware, that the language preference for the camera homepage is set
automatically depending on the operating system language preference. If this
language is not available in the camera, the homepage will be shown in English.
Using the "Browser" button, a previously selected camera can be opened directly in the internet
browser (the default browser for Windows will be used).
77