Subaru LEGACY 2003 Service Manual page 9

C: CAUTION
• Wear working clothing, including, a cap, protec-
tive goggles, and protective shoes during opera-
tion.
• Remove contamination including dirt and corro-
sion before removal, installation or disassembly.
• Keep the disassembled parts in order and pro-
tect them from dust or dirt.
• Before removal, installation or disassembly, be
sure to clarify the failure. Avoid unnecessary re-
moval, installation, disassembly, and replacement.
D: PREPARATION TOOL
1. SPECIAL TOOLS
ILLUSTRATION
ST24082AA210
ST22771AA030
2. GENERAL PURPOSE TOOLS
TOOL NAME
Circuit Tester
Pressure Gauge
Oscilloscope
GENERAL DESCRIPTION
TOOL NUMBER DESCRIPTION
24082AA210 CARTRIDGE
22771AA030 SELECT MONI-
TOR KIT
VDC-7
• Be careful not to burn your hands, because each
part on the vehicle is hot after running.
• Be sure to tighten fasteners including bolts and
nuts to the specified torque.
• Place shop jacks or safety stands at the specified
points.
• Before disconnecting electrical connectors of
sensors or units, be sure to disconnect ground ca-
ble from battery.
Troubleshooting for electrical systems.
Troubleshooting for electrical systems.
• English: 22771AA030 (Without printer)
• German: 22771AA070 (Without printer)
• French: 22771AA080 (Without printer)
• Spanish: 22771AA090 (Without printer)
REMARKS
Used for measuring resistance, voltage and ampere.
Used for measuring oil pressure.
Used for measuring sensor.
VDC
REMARKS