Subaru LEGACY 2003 Service Manual page 13

B: INSTALLATION
1. HYDRAULIC UNIT (H/U)
1) Install hydraulic unit.
Tightening torque:
18 N·m (1.8 kgf-m, 13.0 ft-lb)
2) Connect hydraulic unit ground cable to body.
Tightening torque:
33 N·m (3.4 kgf-m, 25 ft-lb)
3) Connect brake pipes to their correct hydraulic
unit connections.
4) Secure hydraulic unit connector to connector
bracket.
CAUTION:
Align connector with mating receptacle.
5) Connect connector to hydraulic unit.
( 1 )
(1) Relay box connector
(2) Hydraulic unit connector
6) Install air intake duct.
7) Connect ground cable to battery.
8) Bleed air from the brake system.
HYDRAULIC CONTROL UNIT (H/U)
VDC00079
( 2 )
VDC00081
VDC-11
2. RELAY BOX
1) Install relay box and connector bracket.
Tightening torque:
13 N·m (1.3 kgf-m, 9.4 ft-lb)
2) Secure relay box connector to connector brack-
et.
CAUTION:
Align connector with mating receptacle.
3) Connect connector to relay box.
( 1 )
(1) Relay box connector
(2) Hydraulic unit connector
4) Install air intake duct.
5) Connect ground cable to battery.
VDC
VDC00080
( 2 )
VDC00081