Championship Mode Features; Connect Your Gaming Controller And Vehicle; Pit Stop; Racing Off Track - Hot Wheels AI Racing Manual

CHAMPIONSHIP MODE FEATURES

PIT STOP

When you run out of Hazards ! you will need to make a PIT STOP to refill them.
— Steer to the pit lane and carefully drive IN and OUT of the pit.
IMPORTANT: You need to switch on RC ASSIST mode to allow the car to steer into
the pit. Once inside the pit, you can switch off RC ASSIST mode.
(see below for info on RC ASSIST)
After you successfully PIT the gaming controller will let you know, "You're good to Go!"
and hazards will now be refilled.

RACING OFF TRACK

If you get hit by a hazard or take a turn
too fast and race off the track, activate the
RC ASSIST mode to disengage the track
sensors and steer back to the track.
(See below for more info on RC ASSIST)
WINNING THE RACE
The car that completes all the race laps first,
WINS! All other positions and lap times are
announced after all player-controlled cars
finish their current lap.
RC ASSIST
• In PRACTICE and CHAMPIONSHIP modes, if at any time
you drive off-track, or want to temporarily disable track
assistance, you can push the RC button to
activate RC ASSIST.
This mode allows you to navigate back to track with FREEPLAY
controls. A slow BEEP will alert you that you are in RC ASSIST
mode, press the RC button again to deactivate and re-engage
the sensors once you are back on track.
"BEEP!"
14

CONNECT YOUR GAMING CONTROLLER AND VEHICLE

THE ACTION STARTS ONCE YOU POWER ON YOUR CAR AND CONTROLLER.
NOTE: Make sure you have correctly installed the batteries in both your vehicle and controller (see page 4).
1
Press the button to POWER ON your controller.
2
If playing for the first time (or after loading a new set of batteries)
you will be asked to select a language.
3
Use the STEERING STICK to toggle left and right
until you hear the language you want to play in.
4
Press the button to select.
NOTE: You can reset the language at any time by powering off the controller and turning it
back on while pressing down on the
5
Turn the vehicle power switch to I.
I O
button.
6
Listen for the voice prompt from the
controller to confirm:
"VEHICLE AND
CONTROLLER
CONNECTED"
7