Display Explanation - Toshiba HWS-804XWHM3 series Quick Reference Manual

Display Explanation

18: ZONE1, ZONE2
Display
Lights when floor heater or radiator
is connected (when the system has
floor heater or radiator).
ZONE1 selected for Temperature
Lights when system configured to
ZONE2 selected for Temperature
Lights during heating or cooling
operation using the heat pump.
Lights when the internal heater is
energized during heating
Lights when heating is selected.
Lights when cooling is selected.
Lights when the FROST
PROTECTION button is pressed
and goes out when the button is
Lights when Auto operation is
Displays heating/cooling set
temperature. (Heating: 20 to 55°C,
factory setting: Auto, cooling: 7 to
25°C) Goes out when Auto
Lights when the set temperature or
sensor's water temperature is
°C
displayed with the 7-segment
Description
to be changed.
have 2 zones.
to be changed.
operation.
pressed again.
selected.
operation is selected.
indicator.
20: HOT WATER
Display
Lights when hot water supply system is
connected (when the system has hot
HOT WATER selected for Temperature
Lights when hot water supply operation
Lights when the internal heater is
energized during hot water supply
Lights during hot water supply operation.
Lights while hot water boost is activated.
Lights when the ANTI BACTERIA button
is pressed and goes out when the button
Lights when unit enters the data set
Displays hot water set temperature.
(40 to 75°C, factory setting: 65°C)
Lights when the set temperature or
°C
sensor's water temperature is displayed
27
Description
water supply).
to be changed.
is performed by heat pump.
operation.
is pressed again.
mode.
with the 7-segment indicator.