SOFTWARE INSTALLATION
Note: The BTW Software (Version 1.2.2.6 or above) should be installed well prior to the
hardware installation.
Start Here
Once the installation CD is inserted into the computer's CD-ROM drive, the Auto-Run
function will automatically guide you to start the software installation. If the Auto-Run
function is not workable, however, please open the installation CD to find "setup.exe" file and
double-click the "setup" icon to continue.
Note: Before you install an upgraded version of the software, be sure to uninstall any
previous version, which already exits in your computer. For details of un-installation
procedures, refer to the later section titled "Software Un-installation".
For Windows 98(SE)/ME/2000/XP
1. On the Welcome screen, click the Next button.
2. When the License Agreement screen is displayed, read the License Agreement, then click
the radio button to the left of "I accept the terms in the license agreement" and click the
Next button.
3. On the Device Information screen, enter the required information:
- 4 -