Advertisement
14 Key SLEEP
(Tuner
setting)
15
Key 8
(OPTION
setting )
16
Key 9
(MODE
setting )
17
Key 1
(White
balance
adjustment)
FACTORY-OUT SETUP：In D-MODE, press RECALL button to initialize to the FACTORY-OUT
AGING MODE: In D-MODE, press EXIT button to entry AGING MODE.
EEPROM INITIALZATION: In D-MODE, press "-/--" to initialize EEPROM.
NOTICE: Before to be released, any M68 chassis must be initialized to the FACTORY-OUT status.
Don't try to initialize EEPROM, unless software can't work normally.
OPT1
...
MODE1
...
RED(32)
Black and white
GRN(32)
pattern (PAL)
WPR(32)
WPB(32)
WPG(32)
status.
Volume: 30, PG password:0000, Favorite channel: ch1/ch2/ch3, channel
lock: disable, Picture mode: normal, Color temp: normal,
calendar:01-08-2004
----------
setting according to tuner spec.
(all use default value)
----------
(all use default value)
----------
(all use default value)
1. Measure the dark side of the picture with
a color analyzer adjust RED and GRN
until the data on the analyzer become x =
284, y = 299.
2. Measure the bright side of the picture,
Then adjust WPR,WPG and WPB until
the data on the analyzer become x = 284,
y = 299.
3. Repeat step 1 and 2 until you get right
color on both dark and bright side of the
screen.
Advertisement
