Removal Of Hinge Unit And Spigot - Panasonic EB-X70 Service Manual

6.2.3. Camera removal
1. Unhook the camera de-sense shield / flexi-strip ('A') out from its retaining lug on the LCD chassis.
2. Pull the camera out from its mounting position.
6.2.4

Removal of hinge unit and spigot

1. Lift the upper case front from the lower case front. The hinge actuator (A) and hinge spigot (B) can be removed from the
hinge segment on the upper case front.
2. Note that the hinge spigot may be retained in the lower case front assembly.
6.2.5. Vibrate motor and DTHF speaker removal
1. Disconnect the DTHF speaker and vibrate motor plugs from the main PCB (marked 'S' and 'V' respectively) using plastic
tweezers.
2. Lift the vibrate motor / speaker holder from the main board.
3. Remove the vibrate motor wires from the cable management hooks.
NOTE:
Do not pull or apply tension to the vibrate motor or speaker wires at any time.
PMCD030901C8
Service Manual
A
10737-1
A
V
S
DISASSEMBLY / REASSEMBLY INSTRUCTIONS
Section 6
– 33 –
B
10735-1
10720-1
Issue 1
Revision 0