Kalorik OVD 39014 Instructions Manual page 6

 Clean the outside of the spray nozzles with a wet (paper) towel,
dipped in warm water with mild detergent.
 Wash the bottle with warm, soapy water; use a dish brush or towel if
needed.
 To clean the pump head, fill both portions of the bottle with 1/3 of
warm water and add a small amount of detergent. Secure the
pump unit on the bottle and pump repeatedly, until there is no fluid
left. Then fill the bottles again with 1/3 of clean warm water only,
and pump out the water to rinse the pump system from the
detergent.
Note: no parts of this product are dishwasher safe. Hand-wash only!
www.KALORIK.com
6
OVD 39014 - 170120