Advertisement
Wireless Security default is Open. Click the "Config" to set the encryption you need.
The second part is the Wireless Advanced.
Device List: Wlan Device 1 is for 2.4GHz; Wlan Device 2 is for 5.8GHz
Client Isolation: Enable or Disable client isolation
RF Output Power: To set the RF Output Power of the device, it divided into 100%,
75%, 50%, 25%, 12.5%
Coverage Threshold: To limit the RSSI of the access device
Note: Other advanced setting is for more professional or maintenance person,
suggest to keep them as default.
Wlan Device 2 is also the same way for setting if it needs 5.8GHz. After all the
parameter finished, click "Apply" and you will see the Zero Config is generated and
show as below:
www.nc-link.cn
9
Advertisement
