Cisco MWR 1941-DC User Manual page 19

Cisco MWR 1941-DC Router with the Cisco IOS IP-RAN Feature Set
Configuring ACFC and PFC Handling During PPP Negotiation
With Cisco IOS Release 12.2(15)MC1 and later, ACFC and PFC handling during PPP negotiation can
be configured. By default, ACFC/PFC handling is not enabled.
To configure ACFC handling during PPP negotiation, use the following commands while in multilink
interface configuration mode:
Command
Step 1
RPM(config-if)#
ignore}
Step 2
RPM(config-if)# ppp acfc local {request | forbid}
ppp acfc remote {apply | reject |
Purpose
Configures how the router handles the ACFC option
in configuration requests received from a remote
peer, where:
apply—ACFC options are accepted and ACFC
•
may be performed on frames sent to the remote
peer.
reject—ACFC options are explicitly ignored.
•
ignore—ACFC options are accepted, but ACFC
•
is not performed on frames sent to the remote
peer.
Configures how the router handles ACFC in its
outbound configuration requests, where:
request—The ACFC option is included in
•
outbound configuration requests.
forbid—The ACFC option is not sent in
•
outbound configuration requests, and requests
from a remote peer to add the ACFC option are
not accepted.
Configuring Tasks
19