Note: When selecting a wireless channel, "Auto" is the recommended choice. This setting
allows the software to automatically select the clearest channel available.
3. Select the appropriate Receiver, then click Connect. The selected channel will be used.
Note:
This channel is used for adding a new Receiver.
l
Availability of channels depends on the sales region.
l
2.3.1. Using Preferences
You can also define a wireless channel from the Preferences window. To select a wireless
channel:
1. Make sure the computer is disconnected from the Receiver, then open the ScreenBeam
Wireless Display's Preferences window.
2. Select the desired channel from the Wireless Channel list, then click OK.
8