Setting Up Snoo - Happiest Baby Snoo User Manual

• Remove all contents from box.
• Remove SNOO from the protective cloth bag. Turn it upside down on the bag or another
clean surface.
1
Insert each leg into base (match
red and blue arrows on leg
brackets to their corresponding
colored arrows on base).
2
Push leg into base until you
hear a "click."
3
Hand tighten all bolts.
4
Insert power adapter into socket in
the middle of the bottom of base
(there is a red circle around
the socket).
5
Now, place your SNOO on its four feet.
NOTE:
• ALWAYS keep SNOO on a flat, even surface (see "PREVENT STRANGULATION HAZARD" page 9).
• NEVER place anything under SNOO legs or mattress to elevate baby's head (see "PREVENT
STRANGULATION HAZARD" page 9).
SETTING UP YOUR SNOO
6
Pull soft plastic power cable holder
off leg. Insert it on leg that is closest
to electric wall outlet.
7
Insert thin power cable into entire
length of power cable holder.
8
Plug power cord into electric outlet.
9
The power button at the front of
SNOO will flash on and off for a few
seconds before becoming a constant
white light.
10
SNOO is now ready to help you
soothe and protect your baby.
4