REMOTE CONTROL OPERATION
PAIRING THE REMOTE WITH THE LED BULBS
1) Fix all the LED bulbs in their lamp holder and connect the strand to a power outlet. Disconnect the
strand and reconnect it after 10 seconds.
2) Now, WITHIN 3 SECONDS, push one of the Group Lamp ON buttons
to pair the LED bulbs to that selected group.
The LED bulbs will flash slowly 3 times to confirm a succesfull pairing.
3) Repeat the above steps for other groups/strands of light to pair on different groups.
Note:Each LED bulb can only be matched with one group of the same remote control, but can be
paired with up to 4 remote controls at the same time. A group can be paired to any number of LED
Bulbs within the remote range.
A.D.J. Supply Europe B.V. – www.americandj.eu – Color Strand LED Instruction Manual Page 6