Slide Sensor - Sony Ericsson XPERIA X10 Mini Pro U20i Troubleshooting Manual

Problem Areas: Sensors
Check:
Inspect the PBA H2H Flex.
Action:
1. If the PBA H2H Flex or its ZIF connector is damaged –
replace the PBA H2H Flex.
2. Send to higher level of repair.

1.29.2 Slide Sensor

Check:
Inspect the magnet on the Hinge assembly.
Action:
1. If dirty – clean it.
2. If not properly positioned – reinstall it.
3. If the magnet is missing or damaged – replace the Hinge
assembly.
Check:
Inspect the Slider Sensor IC on the PBA Dome, Complete.
Action:
1. If damaged – replace the PBA Dome, Complete.
2. Send to higher level of repair.
1233-9027 Rev2
©
Sony Ericsson Mobile Communications AB – Company Internal
Trouble Shooting (mech)
46(47)