Ampair UTY-LRHYM Installation Manual

Ir receiver unit

Advertisement

Quick Links

AIR CONDITIONER
IR RECEIVER UNIT
UTY-LRHYM

INSTALLATION MANUAL

For authorized service personnel only.
PART NO. 9378626041-03
AMP Air Conditioning
www.ampair.co.uk | sales@ampair.co.uk

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the UTY-LRHYM and is the answer not in the manual?

Questions and answers

Summary of Contents for Ampair UTY-LRHYM

  • Page 1: Installation Manual

    AIR CONDITIONER IR RECEIVER UNIT UTY-LRHYM INSTALLATION MANUAL For authorized service personnel only. PART NO. 9378626041-03 AMP Air Conditioning www.ampair.co.uk | sales@ampair.co.uk...
  • Page 2: Table Of Contents

    Do not install where there is the danger of combustible gas leakage. • Do not install near heat sources, steam. Battery (R03/LR03) For remote controller Remote Use as remote controller holder controller holder En-1 AMP Air Conditioning www.ampair.co.uk | sales@ampair.co.uk...
  • Page 3: Optional Parts

    Fixing of the holder cover with the screws in the standard parts may be unsuitable if the wall or ceiling material is weak. If so, prepare screws suitable for the wall or ceiling material, and fix it. Unit: mm En-2 AMP Air Conditioning www.ampair.co.uk | sales@ampair.co.uk...
  • Page 4: Select The Wiring Pattern

    (cover), and then hook the projection on the bottom of the cover CONNECT onto the bracket (cover). 2 Make sure that there is no gap between the cover and the wall or ceiling. En-3 AMP Air Conditioning www.ampair.co.uk | sales@ampair.co.uk...
  • Page 5: Turning On The Power

    RESET button with the tip of a ballpoint pen or 3 Press the MODE button to accept the signal code, and proceed to STEP 2. other small object. En-4 AMP Air Conditioning www.ampair.co.uk | sales@ampair.co.uk...
  • Page 6 * If setting value is “01” : switching Room temperature is controlled by either indoor unit temperature sensor or remote controller unit sensor. *1: It is effective only to install IR Receiver unit. En-5 AMP Air Conditioning www.ampair.co.uk | sales@ampair.co.uk...
  • Page 7: Selecting The Remote Controller Signal Code

    1 Press the START/STOP button until only the clock is displayed on the remote controller display. 2 Press the MODE button for at least 5 seconds to display the current signal code (initially set to En-6 AMP Air Conditioning www.ampair.co.uk | sales@ampair.co.uk...
  • Page 8: Error Codes

    Outdoor Outdoor unit unit main PCB Refrigerant Pressure error system error 2 (10) Outdoor Inverter PCB unit error Unit flow Branch divider error (13) Active filter Outdoor unit error, PFC circuit error En-7 AMP Air Conditioning www.ampair.co.uk | sales@ampair.co.uk...
  • Page 9 Display mode : 0.5s ON / 0.5s OFF : 0.1s ON / 0.1s OFF ( ) : Number of flashing Wired Remote Controller Display Error code En-8 AMP Air Conditioning www.ampair.co.uk | sales@ampair.co.uk...

Table of Contents