10) Room temperature control switching
This setting is used to set the room temperature control method when the wired remote controller is selected by the Indoor Room
Temperature Sensor Switching Function.
Setting Description
Control by the sensors
of both the indoor unit
and the wired remote
controller.
Control only by the sensor
of the wired remote
controller
11) Indoor unit fan control for energy saving (Only cooling mode)
Enable or disable indoor unit fan control when the outdoor unit is stopped.
Setting Description
No
Yes
* If setting value is "00":
When the outdoor unit is stopped, the indoor unit fan operates following the setting on the remote controller continuously.
* If setting value is "01":
When the outdoor unit is stopped, the indoor unit fan operates at very low speed intermittently.
( . . .Factory setting)
Function Number
Setting Value
00
48
01
( . . .Factory setting)
Function Number
Setting Value
00
49
01
- (01 - 33) -