Philips AVENT SCF862 User Manual page 24

ENGLISH
26
Problem Possible cause
Blended food Blending is not
result is not
enough.
good enough.
Ingredients are
not sufficiently
preprocessed.
Too few or too
much food volume
to blend.
Steaming time is
not sufficient.
The ingredients
are dry and stick to
the wall of the jar
during blending.
The appliance is There is too much
noisy, produces food in the jar.
an unpleasant
smell, is hot to
touch, emits
smoke, etc.
The jar lid is not
closed properly.
You have been
using the blending
function for too
long.
There are white There is limescale
spots on the buildup on these
water tank and parts.
water tank lid.
Solution
Blend the ingredients for a few more
times. Do not blend continuously for
more than 30 seconds at a time.
Ingredients need to be washed,
peeled and cut into small cubes no
bigger than 1cm before you steam
and blend.
Increase or decrease food volume
for appropriately blending.
Add correct amount of water for
sufficient steaming time. Refer to
the "Ingredients and steaming time"
chapter.
After steaming, no need to pour out
the water collected in the jar. Mix it
with the steamed food for blending.
If you use blending function only
(without steaming), add suitable
amount of drinking water in jar,
mix with food ingredients before
blending.
Switch off the appliance and process
a smaller quantity.
Place the jar lid on the jar and close
it securely.
Do not let the appliance blend
continuously for more than
30 seconds at a time.
This is normal. Remove the
limescale periodically. Clean the
water tank lid and jar lid with a moist
cloth. Descale the water tank. Refer
to the "Descaling" section in the
"Cleaning and descaling" chapter.