Table of Contents
Advertisement
Preparation
Registering the sub monitor station to the main monitor station
(REGISTRATION)
The operations described here are based on the VL-SW251 series main monitor. See the Operating Instructions
of the Video Intercom System for more information.
When registering the product to a main monitor of a different series, follow the instructions in the documentation
included with your main monitor.
Place the sub monitor station to be registered near the main monitor station and then operate the sub monitor
station within 2 minutes in succession to the operations of the main monitor station.
LCharge the sub monitor station to be registered for about 30 minutes before registration.
Using the main monitor station
{VOLUME}
1
Press {MENU}, then select "REGISTRATION/
CANCELLATION" by pressing {VOLUME} ( ) or
{PAGE} (▲).
FUNCTION SETTINGS
TIME AND DATE SETTINGS
RING TONE SETTINGS
CONNECTED DEVICE SETTINGS
REGISTRATION/CANCELLATION
2
Press {MENU} (OK), then select "REGISTRATION"
by pressing {VOLUME} ( ) or {PAGE} (▲).
3
Press {MENU} (OK), then select "SUB MONITOR
STATION" by pressing {VOLUME} ( ) or
{PAGE} (▲).
4
Press {MENU} (OK), then select the sub monitor
station to be registered by pressing {VOLUME}
( ) or {PAGE} (▲).
5
Press {MENU} (OK).
Operate with the sub monitor station within 2 minutes.
6
Using the sub monitor station
{PAGE}
{MENU}
{MENU}
{OFF}
6
Press {MENU}.
SETTING/SUB
REGISTRATION
7
Press {D} (OK).
REGISTERED
8
To end the operation, press {OFF} on the main
monitor station.
N
To register a canceled sub monitor station
(page 6) again
6
Press {MENU}, then select "REGISTRATION" by
pressing { } or {▲}.
7
Press {D} (OK).
8
Press {D} (OK).
9
To end the operation, press {OFF} on the main
monitor station.
{D}
1/1
Advertisement
Table of Contents
