Slide Servo Thermo Sensor - Yamaha RMAX Type II G Unit Operation Manual

3 Malfunction Area Indicator
An indicator will illuminate or flash if a malfunction is discovered on the helicopter while a configuration or a
flight is in progress.
The malfunction areas indicated here cannot be handled by the user. Contact your dealer to describe the
symbol for the light that has turned ON or is flashing, and request a repair.
Once one of these indicator lights illuminates, it will continue to illuminate or flash until the main switch is
turned OFF.
YACS Warning Light

Slide servo thermo sensor

The slide servo thermo sensor indicates the temperature state of the slide servo motor.
It will flash when the temperature rises abnormally, or when a malfunction is detected in the thermo sensor.
Indication
ON
Flashing
Intermittent flashing
* It may be difficult to see the LED under direct sun light.
If the temperature of the slide servo has risen, the LED will return to the ON state once the temperature
drops after time has passed. If the thermo sensor has a malfunction, it will continue to flash.
GPS Indicator Light
State
Normal state
(Alternates repeat- The slide servo temperature
edly between ON for has risen, causing an abnor-
1 second and OFF mal state. The malfunction
for 1 second) areas indicated here cannot
be handled by the user.
(Alternates repeat- The thermo sensor has a
edly between 0.1 malfunction. The malfunc-
second of ON and tion areas indicated here
1.9 second of OFF) cannot be handled by the
user.
Meaning
Contact your dealer immediately
to notify which LED is flashing (L/
B/R), and request a repair.
Contact your dealer immediately
to notify which LED is intermit-
tently flashing (L/B/R), and
request a repair.
Pre-Flight Inspection Items
Action
3-6