Pantech ADR8995 User Manual page 112

SEARCHING FOR Wi-Fi NETWORKS
1 Tap Settings from the applications menu.
2 Tap Wireless & networks > Wi-Fi settings.
3 Tap Wi-Fi to activate the technology.
4 Press B and tap Scan. ADR8995 scans networks automatically every six seconds. The newly found
networks appear on the bottom of the list.
ADDING A Wi-Fi NETWORK
1 Tap Settings from the applications menu.
2 Tap Wireless & networks > Wi-Fi settings.
3 Tap Wi-Fi to activate the technology.
4 Tap Add Wi-Fi network.
5 Enter Network SSID and select the security type among Open, WEP, WPA/WPA2 PSK and 802.1x
EAP. Aside from Open, you must enter a password for the network.
6 Tap Save.
DISCONNECTING TO A Wi-Fi NETWORK
1 Tap the network that is connected to ADR8995.
2 Tap Forget to disconnect with the network.
Note You can also disconnect to the Wi-Fi network by pressing and holding the network and tapping Forget
network.
112
CONNECTIVITY