Care And Maintenance - Delta ITG70LED Instructions Manual

CARE AND MAINTENANCE

See safety information before proceeding. Routine maintenance should be done at least once a year.
• Never use solvents, thinner or harsh chemicals when cleaning the fan.
• Do not allow water to enter the motor.
• Do not immerse metal parts in water.
• Do not immerse resin parts in water over 140º Fahrenheit.
• Do not immerse LED module in water.
Turn off power source. Review all safety precautions.
1. To remove grille ❷ , squeeze springs and pull down.
2. Wash and clean the grille ❷ in a sink and dry with a
cloth.
3. Remove dust and dirt from the fan body ❶ with a vacuum
cleaner.
4. Dampen cloth with dust detergent and wipe the fan body
❶ . Then wipe dry with a clean cloth.
5. Replace grille ❷ back onto fan body ❶ .
6. Turn on power source to operate fan again.
1
2
3
4
5
9
Model:
2
2
Vacuum
cleaner
1
1
2
ITG70LED / VFB070B4LED1