Connections; Quick Start; What's In The Box; Placing The Unit - Arcam SoloBar Manual

Connections

USB COAX
Used for service and RCA socket, used
firmware updates only to connect a digital
See page 21 for audio source.
MIC
information about
firmware updates. 3.5mm mini jack,
used to connect mic
supplied during auto
speaker setup.
See page 17 for more
information.
AUX SUB OPTICAL
3.5mm stereo RCA LFE output, TOSLINK socket, used
mini-jack, used used to connect a to connect a digital
to connect an subwoofer. audio source.
analogue audio See page 10 for
source. information about
connecting a Solo sub
via a wireless link.
HDMI OUT
Used to connect a
TV and as the Audio
Return Channel (ARC).
See page 7 for more
information.
HDMI 1 – 4
Used to connect up
to four digital devices
providing 1080p and
3D pass through.
E-6

quick start

What's in the box?

Solo bar soundbar
<
Power cord
<
< Remote control
Batteries (2 x AAA)
<
Microphone
<
< Wall mount bracket
POWER INLET
User manual
<
Used to connect to
Registration card
<
mains power supply.

Placing the unit

Connecting devices

Connecting a TV

The Solo bar is an incredibly versatile Once the Solo bar is positioned correctly, Connect your TV to HDMI OUT using an
product. Place it on a table top, cabinet connect it to your devices as shown in the HDMI cable. If your TV supports ARC, the
or shelf, making sure that it sits level and following illustrations. audio can be played through the Solo bar
securely. Position it below a TV set, either for better sound performance – see page 20
free standing on a flat level surface or Make sure that none of the cables are kinked for setup information. If your TV does not
mounted to a wall. or stretched. support ARC, connect an audio cable to
OPTICAL or COAX input on the Solo bar.
For the best listening experience, we
WARNING: Do not connect your Solo bar to the
recommend wall mounting . Use the
mains until you have connected all of your audio
custom-designed wall bracket supplied.
and video devices.
See page 24 for fixing and mounting
instructions.
Position the Solo bar away from direct
sunlight and sources of heat or damp.
Audio cable
if not ARC
E-7