Control 4 AVM-MC1-B Installation And User Manual page 21

Table 2-2.
Media Controller
Connection Options and Typical Use
Serial 1-2
—Standard
(male) ports: RS-232 only
for up to 2 projectors or
other serial I/O devices.
Serial 3-4
—
Configurable ports
that make use of
Plugable Terminal Block connectors: RS-
232, RS-422, or RS-485 for a projector or
other serial I/O devices. Refer to your
device's installation manual for specific
instructions.
Contacts
—Mini Plugable
Terminal Block connectors for up
to 6 sets (+12v, SIG, and GND) of
contact connections, such as door switches
and motion sensors.
Relays
—Mini Plugable
Terminal Block connectors for
up to 6 sets (normally closed,
normally opened, and common) of relay
connections, such as blinds, fireplace, or
projector screens.
IR In
—Mini Plugable Terminal
Block connectors provide
support for up to 4 IR receivers
that can read infrared signals from remote
controls in remote locations.
Connection Worksheet
Reserved for:
1.
2.
1.
2.
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
17