Balboa bba 2 Installation Manual page 19

Bluetooth Connection
(Topside panels: TP600, TP400)
System Pack
(software version 37.0 or later)
1 - Power up the system
pack with bba2 already
connected to the
system pack.
5 - Select "PPME70BT"
from the pairing list. If
PPME70BT does not
appear, repeat steps 1 - 4.
Turn ON/OFF bba
(Topside Panels: TP600, TP400)
1 - Start at the home screen. The
water temperature is displayed
by default.
Note: bba2 is always at maximum volume when used with TP600 and
TP400 topside panels. Reduce volume on the smart device before
turning ON bba2.
42296-D, bba2 Manual
© 2017 Balboa Water Group. Single Source Solution. All rights reserved.
1382 Bell Avenue | Tustin, CA 92780 | p 714.384.0384 | www.balboawater.com
We reserve the right to change technical data without further notice.
Power Supply
UL1563, 12V
2 - Turn ON bba2 (view
section below).
6 - Click "Connect." Once
connected, you can now
play your favorite music
from your smart device
or music device. Some
devices may auto-connect
in less than a minute.
™
2 - Press Temp (or Warm or
Cool) to begin navigation. The
set temperature (not the water
temperature) will begin flashing in
the LCD display.
RANGE
Topside Panel Options
bba2
Amplifier
3 - Turn ON the
Bluetooth function of
your smart device or
music device.
bba2 operates up to 100 feet in open air. Ranges
vary as they are dependant on installations.
2
3 - Press Light until this screen
appears. "BT" is an abbreviation
for "Bluetooth."
Topside Panel: TP600
(software version 2.12 or above)
Topside Panel: TP400
(software version 2.12 or above)
4 - On your smart device or
music device, click search
for Bluetooth device. Make
sure you are close enough
to the spa tub.
4 - Press Temp to turn ON/OFF
bba2. The Home screen appears,
when Temp is pressed. No visual
cue indicates whether bba2 is
ON or OFF. Play music on a smart
device to determine whether bba2
is ON or OFF.
Page 19