Using Usb; Usb Display On Panels With “Menu” Gui; Using Line In - Balboa bba 2 Installation Manual

Using USB

Connect USB drive here (image 1). You can
select tracks, control volume and play/pause
(image 2 & 3). Volume control is also available
(image 2 & 3). If the topside panel has
"shuffle" and "repeat", they should work also.
USB display on panels with "Menu" GUI
With a newer TP800 (software version 4.11 or
above) or with a newer "Menu" spaTouch 1
(software version 2.8 or above), the USB input
is selectable and displays as "USB". With an
older TP800 or an older "Menu" spaTouch 1
or a TP900, the USB input is selectable, but it
displays a Bluetooth indication.
To work with BBA at all, a TP800 or TP900
must be version 3.13 or above, and a "Menu"
spaTouch 1 must be version 1.7 or above.

Using Line In

You can connect any headphone output to
the Line In connectors (image 1), but you
will likely need an adapter cable because of
the different connectors. Volume is the only
controllable feature when using Line In.
42296-D, bba2 Manual
© 2017 Balboa Water Group. Single Source Solution. All rights reserved.
1382 Bell Avenue | Tustin, CA 92780 | p 714.384.0384 | www.balboawater.com
We reserve the right to change technical data without further notice.
Image 1
Balboa Audio (bba2) amplifier
Image 2
Topside panel display with "Icon" GUI
Track Up/Down
Image 3
Topside panel display with "Menu" GUI
Play/ Volume
Pause Up/Down
(right)
Line Input
(left)
USB
Volume Up/Down
Track
Up/Down
Page 17