Tradecraft Specialties DUMPTR-3 Instruction Manual

Bed for full mattress

Instruction Manual

Bed For Full Mattress

Model DUMPTR-3

Due to the presence of small parts during assembly, keep out of

reach of children until assembly is complete.

Model DUMPTR-3 Dump Truck Bed

Read all instructions before assembly and use.

Keep instructions for future use.

ADULT ASSEMBLY REQUIRED

Lancaster, PA 17601

tradecraftspecialties@gmail.com

www.tradecraftspecialties.com

1900 Alfa Drive

(717) 269-8934

Revised 1/17/2015

1 of 5

Table of Contents

Need help?

Do you have a question about the DUMPTR-3 and is the answer not in the manual?

Page 1 ADULT ASSEMBLY REQUIRED Due to the presence of small parts during assembly, keep out of reach of children until assembly is complete. 1900 Alfa Drive Lancaster, PA 17601 (717) 269-8934 tradecraftspecialties@gmail.com www.tradecraftspecialties.com Model DUMPTR-3 Dump Truck Bed Revised 1/17/2015 1 of 5...
Page 2 General Specifications Assembled dimensions (approximate): 89" long, 54.5" wide, 24" high Disassembly To disassemble, reverse order of steps for assembly. Model DUMPTR-3 Dump Truck Bed Revised 1/17/2015 2 of 5...
Page 3: Care And Maintenance
Reference image only (not to scale): Side assembly (11) Mattress support bar Shelf front section Shelf rear section Shelf [shelf is flat, thin sheet] ¼” Lag bolt ¼” Metal flat washer (40) Screw Model DUMPTR-3 Dump Truck Bed Revised 1/17/2015 3 of 5...
Page 4 [F] and flat washers [G], (3) lag bolts per side with a washer on each lag bolt. Do not yet fully tighten lag bolts. Step 3: Fasten shelf [E] to shelf front section [C] and shelf rear section [D] using (18) screws [H]. Model DUMPTR-3 Dump Truck Bed Revised 1/17/2015 4 of 5...
Page 5 Start at rear of bed and work towards front. Leave 4.5” gaps between each sup- port bar. Step 5: Tighten all hardware. Make sure all assembled parts are tight and secure. Model DUMPTR-3 Dump Truck Bed Revised 1/17/2015 5 of 5...

Semitr-3Trac-3