The Land of Nod Harmony Toddler Rail Assembly Instructions

Harmony Toddler Rail

This page lists the contents included in the box. Please take

time to identify the hardware as well as the individual

components of the product. As you unpack and prepare for

assembly, place the contents on a carpeted or padded area

to protect them from damage. Please follow the assembly

instructions closely. Improper assembly can result in

personal or property damage.

Note: 2 adults are required to safely assemble this product.

WARNING:

CHOKING HAZARD - SMALL PARTS

Small parts present in unassembled state.

Adult assembly required.

*Hardware will be re-used from Harmony Crib construction

Bolts

Flat

Spring

washers

Small

Allen wrench

8135 River Drive • Morton Grove, IL 60053 • p: (800) 933-9904 • e: customerservice@landofnod.com • www.landofnod.com

Assembly Instructions

Bolt

caps

Corner

supports

Large

Allen wrench

1 - Toddler

rail panel

Table of Contents

Do you have a question about the Harmony Toddler Rail and is the answer not in the manual?

Page 1 Harmony Toddler Rail Assembly Instructions This page lists the contents included in the box. Please take time to identify the hardware as well as the individual components of the product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
Page 2 Harmony Toddler Rail Assembly Instructions If mattress support is NOT in lowest position, remove 4 bolt caps with large allen wrench and remove mattress support. Reposition corner supports to the lowest position. Place mattress support into corresponding corner supports of assembly. Secure each corner support with a bolt cap, using large allen wrench.
Page 3 Harmony Toddler Rail Assembly Instructions Fit pre-assembled wood dowels of toddler rail panel into corresponding holes of crib assembly as shown. Attach toddler rail panel with 4 bolts, 4 spring washers and 4 ﬂat washers. Secure bolts with an Allen wrench.
Page 4 Harmony Toddler Rail Assembly Instructions Once the toddler bed is in use, periodically check to make sure all bolts are tight, and tighten as necessary. Keep these instructions for future use. MAINTENANCE Upon completion of assembly, be sure all screws, bolts and fastening devices have been tightened securely.